Electrostatic Technology, Inc
Trickle Impregnation System
20
Serial #18028
7.5 PNEUMATIC
CONTROLS
LOAD AIR CYLINDER 1 – 5
PRESSURE
Air Flowmeter Gauge
(located on Front Panel at Induction Station)
Indicates the amount of air pressure available to the
Load Escapement Pistons to the Roto-Flo Screw
Conveyor.
LOAD AIR CYLINDER 1 – 5
PRESSURE ADJUST
Air Pressure Regulator
(located on Front Panel at Induction Station)
Adjusts and indicates the amount of air being
supplied to the Load Escapement Pistons to the Roto-
Flo Screw Conveyor.
UNLOAD AIR CYLINDER
PRESSURE
Air Flowmeter Gauge
(located on Front Panel at Cure Station)
Indicates the amount of air pressure available to the
Unload Escapement Pistons.
NOTE: THIS CONTROL IS NOT BEING USED
AT THIS TIME.
UNLOAD AIR CYLINDER
PRESSURE ADJUST
Air Pressure Regulator
(located on Front Panel at Cure Station)
Adjusts and indicates the amount of air being
supplied to the Unload Escapement Pistons.
NOTE: THIS CONTROL IS NOT BEING USED
AT THIS TIME.
PART LOCATOR
PRESSURE
Air Flowmeter Gauge
(located on Front Panel at Cure Station)
Indicates the amount of air pressure available to the
Armature Locator Piston.
NOTE: THIS CONTROL IS NOT BEING USED
AT THIS TIME.
PART LOCATOR
PRESSURE ADJUST
Air Pressure Regulator
(located on Front Panel at Cure Station)
Adjusts and indicates the amount of air being
supplied to the Armature Locator Piston.
NOTE: THIS CONTROL IS NOT BEING USED
AT THIS TIME.
MAIN AIR
PRESSURE
Air Flowmeter Gauge
(located at front of Cure Station, view through
hole in Panel)
Indicates the amount of air pressure available to the
Trickle Impregnation System.
Summary of Contents for 18028
Page 4: ......
