-9-
2.4: Wireless Keypad
The system supports up to four wireless keypads. You can use the keypad as an setting
station, perform basic home automation functions and generate a panic alarm in the
event of emergency.
Numeric Keypad
The numeric keypad allows you to set or unset the system by entering a user code.
Setting Keys
Three setting keys are available: Full, Part and Perimeter. These keys set the system
using one of the three setting methods. One-key Setting is an option that is programmed
by your engineer. If this option is disabled, you must also enter a user code when
setting.
Simultaneously pressing the Full and Perimeter buttons generates a panic alarm.
Home Automation On/Off Keys
Pressing one of the Home Automation keys followed by the unit number (01-16) enables
you to control lights and appliances in your home.
Cancel
The Cancel key clears the keypad in the event that you pressed a key by mistake.
For example, when entering your code you enter a wrong digit, the system waits for you to
enter all four digits before it decides that the code is incorrect. Pressing the Cancel key
causes the keypad to disregard what was previously entered enabling you to start again.
Battery Status LEDs
Every time a key is pressed, one of the Battery Status LEDs is lit. When the battery
needs to be replaced, the red Low Battery LED is lit.
Battery
Status LEDs
Setting Keys
Numeric
Keypad
Cancel
Home Auto/PGM.
Off Key
Home Auto/PGM.
On Key
