Electronics Line infinite prime, User Manual

Page: 29 / 32

-29-
Appendix B: Glossary
24hr Zone A sensor which is always active regardless of whether the system is
armed or unset.
A
Armed The state during which the security system is activated. In most
cases, when the system is armed, triggering a sensor generates an
alarm.
Setting Keys
The three keys on the front panel or keypad that activate one of the
system’s setting options.
B
Bypassed Zone
A sensor which is ignored by the system. No alarm is generated
from a bypassed zone even if triggered when the system is armed.
C
Cancel Key A key on the wireless keypad that causes the system to disregard
any partially entered code or command that may have mistakenly
been entered.
Cellular
Communication
Monitoring and control via a cellular network.
Chime
A feature that provides audible annunciation when specific sensors
are activated.
Code
see User Code
Controlled Code
A user code that causes the system to notify the monitoring service
when used to set or unset.
D
Delay
The exit/entry delay times that allow the user to set or unset the
system without generating an alarm.
Descriptor
Custom labels programmed for each user code, zone, keyfob,
keypad etc.
Unset
The state during which the security system is deactivated. During
unset only sensors that are defined as 24hr, Panic, Medical, Fire,
Gas, Flood and Environmental are capable of generating an alarm.
Duress Code
A user code that generates a silent alarm to indicate that the user is
being forced to operate the system.
E
Entry Delay See Delay
Event Log A browsable record of events that have occurred within the system.
Exit Delay See Delay
F
Follow Me
A feature that enables users to receive notification to their telephone
that an event has occurred in the system.
Forced Setting
Setting before the system is ready. If the system is not secured by
the time that the exit delay expires, an alarm is generated.
Front Panel The main interface located on the front of the control panel
consisting of an LCD keypad.
Full Setting An setting method that activates the entire system when the
premises are vacated.