background image

3

Safety Information

In the interest of your safety and to ensure

the correct use, before installing and first

using the appliance, read this user manual

carefully, including its hints and warnings.

To avoid unnecessary mistakes and

accidents, it is important to ensure that all

people using the appliance are thoroughly

familiar with its operation and safety

features. Save these instructions and make

sure that they remain with the appliance if it

is moved or sold, so that everyone using it

through its life will be properly informed on

appliance use and safety.

General Safety

It is dangerous to alter the specifications or

attempt to modify this product in any way.

During high temperature wash programmes

the door glass may get hot. Do not touch it!

Make sure that small pets do not climb into

the drum. To avoid this, please check into

the drum before using.

Any objects such as coins, safety pins, nails,

screws, stones or any other hard, sharp

material can cause extensive damage and

must not be placed into the machine.

Only use the advised quantities of fabric

softener and detergent. Damage to the fabric

can ensue if you over-fill. Refer to the

manufacturer’s recommendations of

quantities.

Wash small items such as socks, laces,

washable belts etc. in a washing bag or

pillow case as it is possible for such items to

slip down between the tub and the inner

drum.

Do not use your appliance to wash articles

with whalebones, material without hems or

torn material.

To avoid damaging the appliance and

personal injury, DO NOT hang on or lean

against the appliance door.

Do not place detergent, bleach or fabric

softener containers on top of the appliance.

They can damage the finish or controls.

Always unplug the appliance and turn off the

water supply after use, clean and

maintenance.

This appliance is provided with a white drum

light. It is class 1, in accordance with IEC

60825-1:1993 + A1:1997 + A2:2001

standard. Should the appliance drum light

need to be replaced, this must be carried out

by a Service Centre.

Under no circumstances you should attempt

to repair the appliance yourself. Repairs

carried out by inexperienced people may

cause injury or serious malfunctioning.

Contact your local Service Centre. Always

insist on genuine spare parts.

Installation

This appliance is heavy. Care should be

taken when moving it.

When unpacking the appliance, check that it

is not damaged. If in doubt, do not use it and

contact the Service Centre.

All packing and transit bolts must be

removed before use. Serious damage can

occur to the product and to property if this is

not adhered to. See relevant section in the

user manual.

After having installed the appliance, check

that it is not standing on the inlet and drain

hose and the worktop is not pressing the

electrical supply cable against the wall.

Do not install appliance on a carpeted floor.

Always be sure, that there is no water

leakage from hoses and their connections

after the installation.

AFFINITY_EN_NO BRAND.qxd  11/07/2008  13.39  Page 3

Summary of Contents for washing machine



























Reviews: