background image

Care and cleaning

16

pressing button 

7

. In case of water high level

and temperature, you must first empty out the

water and then open the door (please read «At

the end of the programme»). If the appliance is

spinning, once you set it to pause, the door

can be opened 

after some minutes

.

After closing the door, it is necessary to select
the programme again and to press the button

8

.

12. 

At the end of the programme

The appliance stops automatically. The display

and all the pilot lights go off. The drum lamp

lights up and the door can be opened.

At the end of a programme with RINSE HOLD

option, the door is locked to indicate that there

is water in the tub.

To empty out the water follow the following

instructions:
• turn the programme selector dial to SPIN

ONLY programme;

• reduce the spin speed, if needed, by means

of the button 

2

;

• press button 

8

;

• at the end of programme, the display and all

the pilot lights go off and it will be possible to

open the door, or

• turn the programme selector dial to SPIN

ONLY programme, select the NO SPIN option

and then press button 

8

: the water is just

drained without spinning.

Remove the laundry from the drum and

carefully check if the drum is empty.

If you do not intend to carry out another wash,

close the water tap. 

DO NOT leave the door open. An open door

could entice children to hang on the door or

crawl inside the drum.
Note
If there are no small children present, leave the

door open to prevent the formation of mildew

and unpleasant smells.

Descaling

The water we use normally contains lime. It is

a good idea to periodically use a water

softening powder in the appliance. Do this

separately from any laundry washing, and

according to the softening powder

manufacturer's instructions. This will help to

prevent the formation of lime deposits.
Maintenance Wash
With the use of low temperature washes it is

possible to get a build up of residues inside the

drum. 

We recommend that a maintenance wash be

performed on a regular basis.

To run a maintenance wash add a 1/2 cup of

liquid bleach to the detergent compartment of

the dispenser drawer and fill the bleach

dispenser compartment to the Max Fill level

and run WITHOUT a clothes load selecting the

Cotton programme at 90°C.
IMPORTANT!

Before cleaning the appliance interior, unplug

the electrical power cord to avoid electrical

shock hazards.

AFFINITY_EN_NO BRAND.qxd  11/07/2008  13.39  Page 16

Summary of Contents for washing machine



























Reviews: