14
1. Sort laundry into loads that can be
washed together
See «Washing Hints» for more details.
2. Pretreat stains and heavy soil
See «Washing Hints» for more details.
3.
Load the laundry
Open the door by
carefully pulling the
door handle outwards.
Place the laundry in
the drum, one item by
one time, shaking
them out as much as
possible. Close the door gently. See «Washing
Hints» for more details.
4. Measure out the detergent, and
eventually the liquid chlorine bleach and
fabric softener and pour it into the proper
dispenser drawer compartment
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required,
pour it into the main wash compartment
«Detergent Wash». Detergent is flushed from
the dispenser at the beginning of the cycle.
Either powdered or liquid detergent can be
used. Note: Liquid detergent will drain into the
washer drum as it is added.
If required, pour fabric softener into the
compartment marked
, and the bleach
agent into the compartment marked
. (the
amount used must not exceed the «MAX»
mark in the drawer). Fill to the mininum fill line
(MIN.) for small loads. Fill to the maximum fill
line (MAX.) for large loads. Do not exceed the
maximum fill line. Close the
drawer gently .
See «Washing Hints» for more details.
5. Select the suitable wash programme by
means of the programme selector dial
(1)
It can be turned either clockwise or
anticlockwise. The relevant pilot light goes on.
The estimated cycle duration will be displayed.
Suitable wash and rinse water temperatures,
final spin speed, options and soil level for each
cycle will automatically be displayed. See
«Programme Table» for more details on the
compatibility among wash programmes and
different temperatures, spin speed, options and
spoil levels.
6. If required, change the wash programme
settings by pressing buttons
2
,
3
,
4
and
6
If the desired temperature, spin speed or soil
level is suitable to the selected programme, the
relevant pilot light will light up.
By pressing the button
4
, it’s possible to select
more than one of the available options. If the
option pilot light starts blinking, it means that
the option is suitable to the programme and
then you can press the button
5
to confirm
your choice. The pilot light will light up.
Operating Sequence
AFFINITY_EN_NO BRAND.qxd 11/07/2008 13.39 Page 14
