24
machine is emptying. This could be done by
tying it to the tap with a piece of string or
attaching it to the wall.
In a sink drain pipe branch. This branch must
be above the trap so that the bend is at least
60 cm above the ground.
Directly into a drain pipe at a height of not
less than 60 cm and not more than 90 cm. The
end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain
pipe must be larger than the outside diameter
of the drain hose.
The drain hose must not be kinked.
Electrical connection
Information on the electrical connection is
given on the rating plate on the inner side of
the appliance door.
Check that your domestic electrical installation
can take the maximum load required, also
taking into account any other appliances in
use.
Warning!
Connect the appliance to an earthed socket.
The manufacturer declines any
responsibility for damage or injury through
failure to comply with the above safety
precaution.
Should the appliance power supply cable
need to be replaced, this should be carried
out by our Service Centre.
Note
Please ensure that when the appliance is
installed it is easily accessible for the engineer
in the event of a breakdown.
AFFINITY_EN_NO BRAND.qxd 11/07/2008 13.40 Page 24
