8
Delay Start Button
By means of this buttons, the wash programme can be delayed from
30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a
maximum of 14 hours.
10
Display
The display shows the following information:
●
The duration of the selected programme: After selecting a
programme the duration of the selected programme appears on
the display.
●
Select the delayed start by pressing the button
10
.
Press this button to select the required delay. The selected delay
time value will appear on the display for few seconds, then the
duration of the programme will appear again. You must select this
option after you have set the programme and before you press
the button
8
.
●
Message «PAU» (PAUSE): It is displayed alternately with the
estimated time remaining when the cycle is paused.
●
Message «LOC» (LOCK): It is displayed alternately with the
estimated cycle time when you lock the controls.
●
If you try to start the programme and the door is open, the
message «DR» (DOOR) is displayed.
●
Message «PF» (POWER FAIL): It is displayed alternately with
Message «PAU» to indicate that a power supply break has
occured and the appliance is not operating. Press the button
8
to
restart the wash programme.
11
Door Lock Pilot Light
and Programme
Phase Pilot Lights
DOOR LOCK:
●
Light on: The door cannot be opened.
●
Light blinking: The door lock is releasing. The appliance has
been probably set to pause.
●
Light off: The door can be opened.
Note
Do not try to force the door open when DOOR LOCK light is on.
The following pilot lights indicate which wash phase the appliance
is carrying out:
WASH: During the wash phase.
RINSE: When the appliance is rinsing.
FINAL SPIN: When the appliance is spinning.
9
AFFINITY_EN_NO BRAND.qxd 11/07/2008 13.39 Page 8
