Electrolux MAGISTAR OVEN 6-10-20GN, Service Manual, Page: 68 / 124

68
D.5 Parameters list chart for all level (T, K, B, C)
The visible parameter list is enclosed in this Service manual chapter, but the complete list is made up of over 440 different
parameters, many of these hidden parameters are “special“ and cannot be manually adjusted by the technicians. The only way to
set all parameters is to follow the procedures of the different electronic boards (PP uploading).
The following list refers to the visible parameters for
Touch T, K / Digit B, C electronic boards. The presence of No. 1 in the Touch /
Digit columns means that parameter is present in those electronics, the presence of “0“ (zero) means that parameter will not be
present.
EXAMPLE:
22 FFSC has the numbering 1 only in the “Touch column“, this means that the parameter 22 will be present only in the
Touch electronic board while in the Digit electronics it will not be displayed/present.
This list can be used as a reference
for all models / electronic boards.
T
ouch
Digit
Parameter
ID
Mnemonic
Short Description
T
able
Min
Max
Default
1 1 1 GAS Appliance type {0, “Electric“}
{1, “Gas“}
0 1 0
1 1 3 FAhr Temperature Scale {0, “ ℃ “}
{1,“ ℉ “}
0 1 0
1 1 5 rod Cooking with open door {0, “Disabled“}
{1, “Enabled“}
0 1 0
1 1 6 LAMb Lambda Probe {0, “Disabled“}
{1, “Enabled“}
0 1 1
1 1 7 FCLn Cleaning environment (factory
setting) {0, “Disabled“}
{1, “Enabled“} 0 1 1
1 1 9 PPM Power Peak Management {0, “Disabled“}
{1, “Enabled“}
0 1 0
1 1 10 dEMo Demo Mode {0, “Disabled“}
{1, “Event mode“}
{2, “Portable“}
0 2 0
1 1 12 Phbo Preheat the boiler in stop
mode {0, “Disabled“}
{1, “Enabled“} 0 1 0
1 1 13 FMAn Manual mode (factory setting) {0, “Disabled“}
{1, “Enabled“}
0 1 1
1 1 14 PrEh Cavity preheating {0, “Disabled“}
{1, “Enabled“}
0 1 1
1 0 15 Faut Automatic mode (factory
setting) {0, “Disabled“}
{1, “Enabled“} 0 1 1
1 0 22 FFSC Food Safe Control (factory
setting) {0, “Disabled“}
{1, “Enabled“} 0 1 1
1 1 24 APPL Appliance level {0, “Combi“}
{1, “Convection“}
0 1 0
1 1 25 APPM Appliance model {0, “LW 6 1/1“}
{1, “LW 6 2/1“}
{2, “LW 10 1/1“}
{3, “LW 10 2/1“}
{4, “LW 20 1/1“}
{5, “LW 20 2/1“}
0 5 0
1 1 26 bPHt Boiler preheating temperature 0 99 97
1 1 30 SEAL Height above the sea level 0 4000 0
1 1 31 tHMA Maximum temperature for
manual water injection 180 300 220
1 1 32 trMA Maximum temperature to use
water in cool down 150 300 180
1 1 33 trMn Minimum temperature to use
water in cool down 0 180 30
1 1 38 ArEC Advanced recovery mode {0, “Disabled“}
{1, “Enabled“}
0 1 1
1 0 39 grEn Green Options (factory
settings) {0, “Disabled“}
{1, “Enabled“} 0 1 1
1 1 44 CLnd Default cleaning cycle {0, “Extra Strong“}
{1, “Strong“}
{2, “Medium“}
{3, “Soft“}
{4, “Rinse“}
0 4 2