Electrolux EKC 603505, Instruction Booklet, Page: 9 / 80

electrolux 9
Operation
Ceramic hob cooking zones
To switch on a cooking zone, turn
the relevant control knob clockwise to
the required heat setting.
The control knob is numbered 0 - 9.
0 - OFF
9 - Maximum
The hob has two types of cooking
zones:
2 normal cooking zones (back left
and front right)
We recommend the plates are
switched to maximum (9) for a short
while to boost the cooking zone, and
then adjusted to the required setting.
2 double circuit cooking zones (front
left and back right)
The front left cooking zone has two
heating elements.
- To switch on the smaller circular
cooking zone, turn the relevant
control knob clockwise to the
required heat setting.
- To switch on both heating elements,
turn the control knob clockwise to
maximum heat setting (9) then turn
the knob further to nearly reach the
"0" symbol. You will hear a "click"
and the wider cooking zone will
switch on. Then turn back the knob
to position 9 and adjust it to the
required heat setting.
Please be aware that the two heat-
ing elements will now operate together,
giving a higher power output than a nor-
mal cooking zone.
Control knob for double circuit
cooking zone
Control knob for normal cooking
zone
Residual heat indicators
The hob is fitted with four residual
heat indicators corresponding to each
cooking zone. The corresponding indi-
cator will remain on until the temperature
falls below 30°C, even after the cooking
zone is switched off.
When a cooking zone is switched
on, a short buzzing may be
heard. This is quite normal and
does not affect the hob operation
in any way.
Mains on light
The mains on light will come on when
the oven function control knob and/or
the cooking zone control knob are set.