Electrolux EKC 603505, Instruction Booklet, Page: 18 / 80

18 electrolux
“End of cooking” function
With this function, you can set the oven to
switch off automatically when a programmed
end of cooking time is over. Place food in the
oven, select a cooking function and adjust the
cooking temperature. Press button
repeat-
edly to select the “End of cooking” function. The
relevant pilot lamp will start flashing. Then, pro-
ceed as follows:
To set the End of cooking time: To set the End of cooking time:
To set the End of cooking time: To set the End of cooking time: To set the End of cooking time:
1. Press button or .
2. After the setting is carried out, wait for 5
seconds: the “End of cooking” pilot lamp
will come on and the display will revert to the
time of day.
3. When cooking time is over, the oven will be
switched off automatically and an acoustic
alarm will be heard, and the pilot lamp will
start flashing. Turn the oven function and the
thermostat control knob to zero.
To switch off the acoustic alarm, press any
button. NOTE: turning the acoustic alarm off
will reset the oven to manual, and if the oven
function and the thermostat knobs are not
set to zero the oven will start to heat again.
To cancel the End of cooking time: To cancel the End of cooking time: To cancel the End of cooking time: To cancel the End of cooking time: To cancel the End of cooking time:
1. Press button repeatedly to select the “End
of cooking” function. The relevant pilot lamp
will flash and the display will show the pro-
grammed end of cooking time.
2. Press button until the display shows the cur-
rent time of day. The programmer will beep and
the pilot lamp will go out.
“Cooking duration” and “End of
cooking time” combined
The functions “Cooking duration” and “End
of cooking time” can be used simultaneously to
set the oven to switch on and off automatically
at a later time.
1. With the “Cooking duration” function (carry
out the cooking duration setting as described