24
Installation manual
ELECTROLUX ADDRESS
For a Compass Control/Compass Pro machine the EDS controller’s address is pre-set to 000. For a Clarus Control
machine the EDS controller’s address is pre-set to 001.
Make sure the washer extractor’s address is also set to 0 or change the EDS controller’s address to match the ad-
dress in the washer extractor.
Activate the
ELECTROLUX ADDRESS
menu and set the address.
ELECTROLUX ADDR.
000/001
Note!
The communication between the washer extractor and the EDS controller will not work if the addresses are
not the same.
The communication is verified by the presence of an asterisk (*) in the right corner on the bottom of the display.
ELECTROLUX
PROG
S 12345
STEP
-
TIME
-
WGT
-
TEMP
-
EFF
*
MACHINE WEIGHT
Activate the
MACHINE WEIGHT
menu and set the capacity weight for the washer extractor. The capacity weight is
found on the label on the back of the machine.
MACHINE WEIGHT
000
DUAL CONTROLLER
This menu is only valid if you have two EDS Controllers and two pump stands connected to one machine.
Activate the
DUAL CONTROLLER
menu.
Select controller 1 or 2 or turn the function off.
DUAL CONTROLLER
OFF
CONTROLLER 1
CONTROLLER 2
