34
Other Convenient Features
HELP
Help
provides 4 features that make using your
oven easy because specific instructions are
provided in the Interactive Display.
1. CHILD LOCK
The Child Lock prevents unwanted oven operation
such as by small children. The oven can be set
so that the control panel is deactivated or locked.
To set, touch
Help
, the number 1 and then touch
START
. Should a pad be touched,
CHILD LOCK
ON
will appear in the display.
To cancel, touch
Help
and
STOP/CLEAR
.
2. AUDIBLE SIGNAL ELIMINATION
If you wish to have the oven operate with no audible
signals, touch
Help
, the number 2 and then touch
STOP/CLEAR
.
To cancel and restore the audible signal, touch
Help
, the number 2 and then touch
START
.
3. AUTO START
If you wish to program your oven to begin cooking
automatically at a designated time of day, follow
this procedure:
•
Suppose you want to start cooking a stew for
20 minutes on 50% at 4:30. Before setting,
check to make sure the clock is showing the
correct time of day.
PROCEDURE
1
. Touch
Help
.
2
. Touch number 3.
3
. Enter the start time.
4
. Touch
Clock
.
5
. Enter cooking
program.
6
. Touch
START
.
NOTE:
1. Auto Start can be used for manual cooking if clock
is set.
2. If the oven door is opened after programming
Auto Start, it is necessary to touch
START
for
Auto Start time to appear in the readout so that
the oven will automatically begin programmed
cooking at the chosen Auto Start time.
3. Be sure to choose foods that can be left in the
oven safely until the Auto Start time. Acorn or
butternut squash are often a good choice.
4. If you wish to know the time of day, simply
touch
Clock
. As long as your finger is touching
Clock
, the time of day will be displayed.
4. REFRESH CYCLE
The oven has a special catalyst which assists with
smoke and odor removal.
Use the Refresh Cycle to:
•
Condition the heater before using the oven the
first time.
•
Remove any objectionable odor.
•
Keep the catalyst in optimum condition.
Follow the procedure below. The oven tempera-
ture will be maintained at 450˚F when the refresh
cycle operates.
PROCEDURE
1
. Touch
Help
.
2
. Touch number 4.
3
. Touch
START
.
NOTE:
1. Remove the turntable from the oven before the
Refresh Cycle. No food should be in the oven.
2. The Refresh Cycle is 30 minutes.
3. During the Refresh Cycle some smoke and
odor may occur. Open a window or use the
ventilation fan in the room.
CAUTION:
The oven door, outer cabinet and oven cavity may
be hot.
0
3
4
START
Help
3
Timer
Clock
x 6
Power
Level
0
2
0
0
START
Help
4