7
General Instructions
the control, touch any key and the degree symbol
will begin to flash
To exit this mode:
If using software version 2.8,
this mode will exit automatically when the unit is
unplugged. If usong software version 2.9, this mode
needs to be exited by the same key combination as
used to enter the mode.
Service Mode
This mode has 27 different options available for
service diagnostics. To enter the mode hold the
WARMER key and press the LIGHT button three
times. The display will show “0’ and the board will
beep once. When in this mode the WARMER and
COLDER keys will act as up and down arrows to
select the desired option. The LIGHT key is the
ENTER key and will enter a function. To exit the
Service Mode, scroll to option 99 and press the
LIGHT key. After five minutes of not touching any
keys the mode will also exit automatically.
Blackout / Sabbath Mode
This mode allows for observation of holidays on
which lights cannot be activated. Hold the LIGHT
key for 10 seconds until the °F starts flashing.
When released, the unit will beep once and the
display and cabinet light will shut off. To cancel this
mode, hold the LIGHT key again for about 10-12
seconds.
Clean Cycle
To enter the self cleaning cycle, hold the ON/OFF
key and press the LIGHT button three times. The
unit will beep once and the display will show CL.
Follow the cleaning instructions. At the conclusion
of this mode (1 hour), the display will revert to
setpoint and the unit will resume normal operation.
To cancel this mode, turn the unit off via the
keypad.
Ice Maker Off Mode
(not available)
Force Harvest
This mode can be used to force ice to harvest from
the mold. To enter this mode, hols the LIGHT key
and press the UP arrow three times. The unit will
initiate an ice harvest. There is no audible tone
when entering this mode.
Forced Defrost
This will allow the unit to defrost quickly. For R and
WC units, this is just an off cycle. For units with hot
gas defrost, the unit will enter a hot gas defrost per
the specification. Hold the LIGHT key and press
ON/OFF three times. The unit will beep once when
entering this mode. To exit this mode, either do the
same key combination or turn the unit off via the
keypad.
Ice Thickness Adjust
This will allow addition or subtraction of up to five
minutes from the ice-making cycle. To enter this
mode, hold the UP arrow and press the DOWN
arrow three times. The unit will beep once and
display the current ice thickness. Use the arrows
to adjust up or down. Press LIGHT key when
completed. Please refer to the ice thickness section
of the manual to view proper cube sizes and
recommendations.
Temporary Shutdown / Office Mode
In some cases it may be requested for the unit to
be shut down for short periods, during meetings
for example. To do this hold the DOWN arrow and
press the UP arrow three times. The unit will beep
once and display OFF on the display. This mode
can be canceled by removing power from the
unit or turning it on via the display. The mode will
automatically be changed back to ON after three
hours.
Relay Status
To see which relays are operating, hold the DOWN
arrow and hit ON/OFF three times. The unit will
scroll through all relays and display whether
they are on or off. See specific unit section for
explanation.
Summary of Contents for E15IM60GPS
Page 47: ......