Electrolux Combi TOUCH, User Manual

Page: 27 / 64

27
• Set the delta value for the cavity temperature;
• Eventually set the core probe temperature;
The display shows the set humidity value, for the cavity
temperature the delta value set and for the probe the
current and the target values;
NOTE!
If creating more phases at least one of them
must be driven by probe with the cavity
temperature set as a delta from the food
core temperature probe value. Otherwise
the START button is deactivated and the
message “Eco delta cooking program invalid
pops up.
• Touch button to start the cycle.
• Once the cavity temperature is reached, load the oven
and insert the food probe in the product.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
Eco Delta progressive
2. This cycle allows to cook the food maintaining always the
link between the cavity temperature and the food core
probe temperature.
• Set the delta value between the cavity and the core
probe temperatures;
• Set the core probe temperature;
The display shows:
– as for the
cavity temperature the set value and the
target delta value;
– as for the food probe temperature the current and
the target values;
• Touch button to start the cycle.
• Once the cavity temperature is reached, load the oven
and insert the food probe in the product.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
It is possible to save and store the performed presets; see how
to manage them at
Presets management paragraph of this
chapter.
REGENERATION
This cycle is a set of categories and cooking cycles to reheat
chilled food keeping the humidity controlled. It works as a
standard automatic cycle.
To start a regenerating cycle, proceed as follows:
1. Once accessed the cycle, select the required item among
plate or tray;
2. Select the cycle type and set the parameters defining the
status of the food to regenerate;
3. Touch button to start the cycle.
CAUTION
Cold food shall not to be added to the
cavity for regeneration while the Maintain-
ing (HOLD) phase is operating.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
STATIC COMBI
This cycle simulates static cooking using a more gentle air
distribution. The oven performs the cycle in manual mode
without the fan adjusting.
To start a static combi cycle, proceed as follows:
1. Select a preset, if created;
If the cavity temperature is lower or higher then the set
temperature the oven starts a cooling down or a preheat-
ing phase.
2. When the oven has reached the cooking temperature,
load the oven and, if necessary, insert the food probe in
the product.
3. Close the door and touch button to start the cycle.
The fan speed is not adjustable.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
Eco Delta cooking
Delta progressive
Eco Delta cooking
AUTOMATIC USER
7
20°C
50% 15
°C
°C
51
70°C
02:35 h:m
30
%
Eco Delta cooking
Delta progressive
Eco Delta cooking
AUTOMATIC USER
25°C
5
°C
°C
25
70°C
Preset dynamic
AUTOMATIC USER
USER AUTOMATIC
Custom
Probe
Plate
AUTOMATIC USER
Timer
Cooking control
Probe Timer
Load
Standard Full
Humidity content
Dry Medium Moist
23
°C
50°C
Custom
Low temper.
cooking
Eco Delta
cooking
Regeneration
Proving Sous vide
Advance FSC FSC low risk
guide
FSC high risk
guide
Dehydratating Fresh pasta
pastorization
Smoker
Static combi
AUTOMATIC USER
100°C
01:30 h:m
20
%
50
%
01:30
:00
25
°C
USER PRESET 1
1