Electrolux 2.7 Cu. Ft. Tubs, Service Manual

Page: 62 / 80

62
SECTION G - TEARDOWN
This section will describe how to remove components
from a top load washer. Unless stated, the procedure
will be the same on all top load washers. Unless stated,
reverse the procedure to reinstall the component.
Always remove electrical power from
the washer when working in an area where electrical
power is present.
Removing the knobs:
Timer knob: (some models)
1. The timer knob is threaded to the shaft. To remove
the timer knob push the knob in, to the off position,
and turn the knob counter clockwise.
Timer knob: (some models)
1. The timer knob is held on the shaft by a locking rod
that extends to the rear of the timer. To remove the
knob, disconnect power, remove the rear panel of
the console and using a small screwdriver pull the
locking rod backward to release the knob.
Timer skirt: (some models)
1. Remove the timer knob and the washer around
the timer shaft between the knob and the skirt.
2. Pull the skirt straight off.