64
Removing the timer: (some models)
1. Disconnect the washer from electrical supply.
2. Remove the rear panel from the console and the
timer knob and skirt.
3. Unplug the two wiring harnesses from the timer.
4. Remove the two screws holding timer to the con-
sole panel and pull the timer out the rear.
Removing the timer: (some models)
1. Disconnect the washer from electrical supply.
2. Remove the rear panel from the console and the
timer knob and skirt.
3. Unplug the wiring harness from the timer.
4. Remove the screw holding the timer to the console
front panel.
5. From the rear of the console lift timer locking tab
and slide the timer to the right to release it from the
control mounting plate and pull back on the timer.
Removing the speed switch, option switch or temp
switch:
1. Disconnect the washer from electrical supply.
2. Remove the knob from the switch and the rear
panel from the console.
3. Disconnect and mark the wires from the switch.
Locking Tab
Summary of Contents for 2.7 Cu. Ft. Tubs
Page 10: ...10 Caution Disconnect Electrical Current Before Servicing ...
Page 11: ...11 ...
Page 35: ...35 ...
Page 80: ...80 ...
