Electrolux 2.7 Cu. Ft. Tubs Page 45 Service Manual Download

Page: 45 / 80

Spray rinse during the first pump cycle with the temp switch set to:

All settings other than

Timer contact T23 swings from T22 to T24. Terminal T24 provides power through T21 to

the cold water solenoid.

Warm / Warm

Timer contact T23 swings from T22 to T24. Terminal T24 provides power through T21 to

the cold water solenoid and power to terminal C of the temp switch. With contacts FF to

H and FF to C of the temp switch closed, power is applied to the hot solenoid giving a

warm spray rinse.

During the rinse cycle with temp switch set to:

All settings other than

Timer contact T23 swings from T24 to T22 and timer contact T22 is closed to T24. Terminal

T24 provides power through T21 to the cold water solenoid.

Warm / Warm

Timer contact T23 swings from T24 to T22 and timer contact T22 is closed to T24. Terminal

T24 provides power through T21 to the cold water solenoid and power to terminal C of the

temp switch. With contacts FF to H and FF to C of the temp switch closed, power is

applied to the hot solenoid giving a warm rinse.

Warm / Warm

Summary of Contents for 2.7 Cu. Ft. Tubs

















































































Search results

Summary of Contents for 2.7 Cu. Ft. Tubs

Reviews:

Related manuals for 2.7 Cu. Ft. Tubs

Brands by name

Popular brands

Electrolux 2.7 Cu. Ft. Tubs, Service Manual

Search results

Summary of Contents for 2.7 Cu. Ft. Tubs

Reviews:

Related manuals for 2.7 Cu. Ft. Tubs

Brands by name

Popular brands