iConserve User Guide___________________________________________________
3
BWD/-: Check last data/number (minus).
MODE/SET: Setting modes and parameters.
Transmitter and sensor
The sensor coupler clips around the incoming live power cable in your breaker panel. The
sensor’s adapter plug is then inserted into any one of the transmitter’s ports. Once batteries are
installed information will begin to transmit wirelessly to the main display unit (receiver).
LCD
1. Display mode: Energy/Cost/CO
2
emission.
2. Receiving signal indicator.
3. Battery low indicator.
4. Alert icons to warn of 30% or higher of usual daily consumption level of electricity.
5. Accumulative historical energy/cost/CO
2
emission data.
6. The histogram of energy/cost/CO
2
emissions for last seven months, weeks, days, hours.
7. The display for
current
real-time energy/cost/CO
2
emission readings.
8. Clock and Calendar.
9. Cost tariff rate.
10. Money currencies.
Installation
Locate your home or businesses breaker box (panel). Then remove the panel carefully, you’ll
find 1, 2, or 3 thick (16mm or 10mm) red or black cables. These cables are live main cables. To
record your entire home or business energy consumption you will need to install the iConserve
