![background image](http://html.mh-extra.com/html/electroflip/iconserve/iconserve_user-manual_2381618016.webp)
iConserve User Guide___________________________________________________
16
5. Current measurement accuracy: <5%.
6. Wireless transmitting cycle: 2s/8s/64s (2 seconds after pushing CHECK button. It will
issue 15 consecutive cycles to verify the emission intensity of your environment. Within
one hour, after power is on or reset operation, transmitting cycle will be 8 seconds. After
one hour, transmitting cycle will be adjusted to 64 seconds automatically).
7. Low power detection.
8. Memory of total electricity consumption for up to two years.
9. Single-phase, two-phase, three-phase power measurement systems are compatible.
WARNING!: Before attempting to install the transmitter and clamp sensor in your breaker
box or power source for your home or business FIRST consult with a local Certified
Electrician. In addition it’s highly recommended that you hire this Certified Electrician to
safely and properly install these components. Inappropriate contact with your breaker
box or main power source can be FATAL.
All information and instructions included in this manual are current as of March 22, 2014.
However, due to the fluid nature of advancing technology, some characteristics may change or
need modifications in the future. Should you encounter any problems or have any further
questions about your purchase, please visit us atpage.
This document is property of ElectroFlip LLC. No unauthorized reproductions allowed.