Electro Industries/GaugeTech ProtoCom Installation & Operation Manual Download Page 27

Page: 27 / 118

Electro

Industries/GaugeTech

™

Powered by Innovation™

Doc

E204701

1-13

1: Introduction to the ProtoCom/ProtoCom-Lon

• If the IP address of the ProtoCom has been changed by previous configuration, you

will need to get the assigned IP address from the network administrator.

1.9: ProtoCom/ProtoCom-Lon Installation

You have two choices for installing the ProtoCom/ProtoCom-Lon:

• Mounting on a DIN rail using the DIN Rail clip that came attached to the unit

• Mounting on a panel using the unit’s mounting holes

1.9.1: Mounting on a DIN Rail

The ProtoCom/ProtoCom-Lon comes with an attached DIN Rail clip.

Figure 1.11: DIN Rail Clip

To mount the unit on a DIN Rail:

1. Latch the top edge of the clip onto the DIN Rail and push down on the unit to

compress the butterfly spring.

2. Clip the bottom edge of the clip onto the DIN rail and stop pushing down on the

unit. The butterfly spring will hold the unit in place.

DIN Rail clip

Butterfly spring

Two screws hold the
clip onto the unit

Top edge of clip

Bottom edge of clip

Summary of Contents for ProtoCom























































































































Search results

Summary of Contents for ProtoCom

Reviews:

Electro Industries/GaugeTech ProtoCom, Installation & Operation Manual, Page: 27 / 118

Search results

Summary of Contents for ProtoCom

Reviews: