manualshive.com logo in svg

Electro Industries/GaugeTech ProtoCom, Installation & Operation Manual, Page: 15 / 118

Share
Download
Electro Industries/GaugeTech ProtoCom Installation & Operation Manual Download Page 15

Electro 

Industries/GaugeTech

™

Powered by Innovation™

  

                                                                             

Doc

#    

E204701

                              

       1-1

1: Introduction to the ProtoCom/ProtoCom-Lon

1: Introduction to the ProtoCom/
      ProtoCom-Lon

1.1: Overview of the ProtoCom/ProtoCom-Lon Gateway

The ProtoCom/ProtoCom-
Lon is an external, high 
performance Building Auto-
mation System (BAS) 
multi-protocol gateway that 
is pre-configured to auto-
matically communicate 
between Electro Industries/
Gaugetech (EIG) meters 
and GE’s PQMII meter, and 
various building automation 
protocols. 

The ProtoCom supports: BACnet® MS/TP, BACnet®/IP, Johnson Controls’ Metasys®  
N2, EtherNet/IP and DF1, and Modbus® TCP protocols; and the ProtoCom-Lon sup-
ports the LonWorks® protocol. With the ProtoCom, the meters’ Modbus communica-
tion is converted into BACnet or other popular BAS protocols. With the ProtoCom-Lon, 
the meters’ Modbus communication is converted into LonWorks® protocol.

The ProtoCom/ProtoCom-Lon enables communication with Building Automation Sys-
tems (BAS) and Sierra Monitor Corporation (SMC) Cloud. SMC Cloud enables remote 
device control, data access, and troubleshooting.

The ProtoCom/ProtoCom-Lon connects to either the EIG and GE meter’s RS485 port 
or via network connection to the Ethernet port. The ProtoCom/ProtoCom-Lon unit also 
has an auto-discovery mode that automatically identifies and configures meters con-
nectedvia the RS485 serial port. with auto-discovery, you do not need to do manual 
mapping of the meter’s Modbus points.

The ProtoCom/ProtoCom-Lon is shipped as a kit (ProtoCom-KT/ProtoCom-Lon-KT) 
which consists of the unit, a power supply, a communication cable, a one page Quick-
start guide, and this manual on a CD.

Figure 1.1: ProtoCom/ProtoCom-Lon

Summary of Contents for ProtoCom























































































































Reviews:

No comments