ELECTRO FREEZE SLX400E, Operator'S Manual

Page: 12 / 74

2 184584
ELECTRO FREEZE Soft Serve Models SLX400E, SLX500
2.1 Uncrating and Inspection
Figure 2-1 Machine bolted to Shipping Base
CAUTION
Be sure to properly support
the machine when removing
bolts and installing legs or
casters.
When the unit is received and while
the carrier is still present, inspect the
shipping carton for any damage that
may have occurred in transit. If the
SHOCKWATCH® label indicates red and/
or the carton is broken, torn, or punctured,
note the damage on the carrier’s freight
bill and notify the carrier’s local agent
immediately.
1. Remove the carton from the pallet,
and move the machine as close as
possible to the permanent location.
2. Remove the shipping bolts on the
bottom of the freezer (figure 2-1) and
install either the legs or casters (figure
2-2).
Figure 2-2 Installing Mounting Legs or Casters
NOTE: Screw casters
or legs all the way in
coupling, then adjust
to level side to side
with a 1/4” slope to
the front.
REAR OF UNIT
FRAME WELDNUT
LEG SUPPORT
PALLET
REMOVE HEX HEAD BOLTS
(4) AND FLAT WASHERS
REAR OF UNIT
LEG SUPPORT
SET SCREW
LEG COVER
LEG
REAR OF UNIT
LEG SUPPORT
CASTER WITH BRAKE
CASTER WITHOUT
BRAKE