Display of Powered Motor
Display of Power-Assist
: When motor is operating under power-assistance, the display
interface flashes the “ASSIST” sign. The indicator will cease after
5 - 20 seconds
.
Display of Power-Assist
Battery Capacity Indicator
The KT-LCD3 can identify 24V, 36V, 48V battery capacities when used with supporting
controllers. When the battery capacity is over 70%, four bars from the battery indicator will
be displayed. As the battery capacities drop, the bars will change accordingly. Once the
power capacity is less than 15%, the battery indicator will be empty and show zero bars. If
the power display frame flashes, it is due to voltage shortage where the controller will
power off.
Pedal Assist System (PAS)
Press
button or
button to adjust the pedal assist level (ratio), changing the
motor power output. Range of pedal assist is between 1 and 5 (this can also be configured
according to the rider’s requirements), where one provides the lowest power and five
provides the highest. When the PAS level is set to zero, the pedal assist function is off.
12
Summary of Contents for KT-LCD3
Page 1: ...KT LCD3 User Manual ...