Motor Operating Power and Temperature
While e-bike motor is in use, real time output power from the motor is displayed on the LCD.
The operating temperature of the motor can be displayed with supporting sensors installed in
the motor to output the temperature. When the motor operating temperature exceeds the
warning value, temperature display flashes to alarm the rider. In this circumstance, the motor
controller will offer the appropriate protection to motor and auto shutoff.
Ambient Temperature
Upon start-up the environment temperature is displayed on the bottom right hand
corner. The displayed figure may not accurately indicate the environment temperature
immediately after start up, however will adjust within 10 minutes.
Single Data Clearing
After
five seconds
after turning on LCD, while on display 1 hold both the
button and the
button
simultaneously for
3 seconds
. The single trip time (TM) and single trip
distance (DST) will flicker. Press
button and the record contents of both will be cleared. If
there are no operations within five seconds of (TM) and (DST) flashing, the
LCD will return to display 1, and the original record content will be saved.
14
Summary of Contents for KT-LCD3
Page 1: ...KT LCD3 User Manual ...