9
Power up & testing-
blind supplied without a control
New blind - Existing Remote control/wall switch
Before you begin
The following instructions are relevant if you already have a remote control/wall switch and selected 'no control needed'
when ordering your Electra blind. The blind supplied has been set up with the up and down stop position preset for your
convenience.
Pairing your remote control/wall switch to your blind
STEP 1: Initiate programming.
Press both up and down
buttons together briefly and
let go - the blind will "jiggle".
A jiggle is a brief up and down
motion .
STEP 2: Pair the control. Press
and hold the programming
button* on the back of the
your handset or wall switch
until the blind jiggles. Your
control is now paired to the
blind motor.
Electra Top Tip!
If you have a 4
channel handset,
make sure you select
the channel the blind
is to operate in before
pressing the
programme button.
Single-channel (remove back cover)
*How to locate the programming button on your control (for
timers and other smart accessories please visit the product
instruction guide):
4-channel remote
Wall Switch
Summary of Contents for Honeycomb Series
Page 18: ...electrablinds co uk ...
