Electra Honeycomb Series, How To Install

Page: 5 / 18

STEP 1- Marking the bracket positions Position
the blind where you’d like to fix it at your
window. Be careful to avoid any obstructions/
window handles as the blind may be damaged
if it is lowered onto these. Make a pencil mark in
the position of the bracket hole for drilling.
Ensure you allow a minimum of 3.5cm behind
the blind for the hook-on external battery pack.
Mark the brackets approx 3.5cm in from each
end with the other brackets spaced evenly
between them.
STEP 3- Mounting the
Honeycomb blind
Place the back lip of your headrail
into the back hook of the bracket
and push into the mounting clip
until there is a firm 'click'.
Honeycomb Blind Installation Top-fix
(inside recess)
Electra Top Tip!
If securing the brackets to
plaster, stone, brick, etc., drill
the holes at the
marked positions using a
5.5mm masonry drill bit, then
use the wall plugs and screws
supplied to fix the brackets.
STEP 2- Fitting the brackets
Secure the brackets in place at the
marks previously made using
suitable fixings, with the larger lip
to the front.
5