14
14
Add/delete controls
Step 1 - Take a handset or wall
switch that is already
programmed to the blind
motor.
Step 2 - Press and hold the
program button of the
handset or wall switch until
the blind jiggles (approx
2-3 secs).
Step 3 - Press the program
button again to unpair the
control.
Add a control
Step 1 - Press the program
button on your handset or
wall switch that already
controls the blind for about
2 seconds until the blind
jiggles. If using a 4 channel
handset, make sure you
have the right channel
selected.
Step 2- Press and hold the
program button of the new
handset or wall switch until
the blind jiggles (approx 1
sec).
OR wall switch
Control to add to the blind memory
Single-channel (remove back cover)
OR 4-channel
Delete a control
Control already paired to the blind
Single-channel (remove back cover)
OR wall switch
OR 4-channel
Summary of Contents for Honeycomb Series
Page 18: ...electrablinds co uk ...
