STEP 3 - To reverse
the direction of the
motor, press and hold
the 'my' button for
approx 2 seconds
until the blind jiggles.
Reprogramme
STEP 1 -Press and hold
simultaneously the Up
and Down buttons for
approx 5 seconds until the
blind jiggles.
Reset and reprogramme procedure
Before you begin - Disconnect the power to all other powered blinds while programming.
Reset
STEP 1 - Disconnect the battery pack.
STEP 2 - Remove the blind and the battery pack from their mounting brackets and lay out on a table.
STEP 3- Reconnect the battery pack.
STEP 4 - Initiate reset - Take a paper clip and press and press the reset button in the recessed hole
beside where the power cables enter the motor. Hold until the blind jiggles 3 times (approx 12 secs). All
settings are deleted and the motor has been reset.
12
STEP 2 - Press the
down button. Does
the blind move down?
YES- the blind moves down
while pressing the down
button - Go to step 4.
NO - the blind moves up
while pressing the down
button - continue to step 3.
Press with a paperclip
for approx 12 secs
STEP 5 - Disconnect the battery pack.
STEP 6- Refit the blind and battery pack.
STEP 7 - Reconnect the battery pack, then follow the
reprogramme steps below.
Summary of Contents for Honeycomb Series
Page 18: ...electrablinds co uk ...
