22
6.2.1 Establishing Remote Connection Between ET082 System and Configuration Server
In order to activate a remote GPRS connection between ET082 system and ELDES configura-
tion server please , send the following SMS message from user phone number.
Upon the successful SMS message delivery, the system establishes a connection session for
20 minutes. An SMS reply, containing device IMEI number and confirming a successful con-
nection establishment, is sent shortly.
In case it is necessary to establish a connection between ET082 system and a third-party con-
figuration server, send the following SMS message.
Initiate the
Connection to
ELDES Server
Initiate the
Connection to
Third-Party Server
NOTE:
Public IP address (host-name) and port number are necessary when connecting to a third-party-server for the first time
only. When connecting to the server next time,
XXXX_stconfig
is enough as the IP address (host-name) and port number are saved
in the device memory after the first successful connection.
6.2.2 Connecting to ELDES Configuration Server
using
ELDES Configuration Tool
Software
5.3.2.1 Run
ELDES Configuration Tool
software.
5.3.2.2 Press
Remote Configuration
button.
5.3.2.3 In the next window, select
Connect to Remote Serv-
er (recommended)
and press
Next
button.
5.3.2.4 Enter the received IMEI number in
Device IMEI
entry.
5.3.2.5 Press
Continue
button.
5.3.2.6 Upon the successfully established connection, the sys-
tem prompts for an administrator password.
5.3.2.7 By entering a valid administrator password, the sys-
tem grants access to full configuration remotely.
5.3.2.8
Remote Configuration Management
window dis-
plays all performed configuration actions.
SMS text:
XXXX_STCONFIG
Example:
1111_STCONFIG
SMS text:
XXXX_STCONFIG:IPaddress:Port or XXXX_
STCONFIG:HostName:Port
Value:
Ipaddress – public IP address of third-party configuration server;
Port – port number of third-party configuration server, HostName - public
host-name of third-party configuration server.
Example:
1111_STCONFIG:62.80.115.102:4522
