User manUal elDes eT082 v1.2
17
5.3 Advanced Mode
The communication method (-s) of
Advanced
mode is selected by
ELDES Configuration Tool.
Advanced
mode features the following
communication methods:
• Voice Calls;
• SMS;
• GPRS;
•
CSD.
Advanced
mode supports 1 primary and up to 2 backup connections. All of the aforementioned communication methods can be
set up as primary or backup in any sequence order.
NOTE:
The jumper position on
SET/MODE
PCB pins becomes ineffective as soon as
Advanced
mode is enabled.
5.3.1 Voice Calls Method
ATTENTION:
DTMF phone number dialing mode must be enabled on alarm system, activated
Ademco Contact ID®
or
Scancom
data transmission protocol and monitoring station phone number set with international code, i.e. For UK London 20xxxxxxxx
or 004420xxxxxxxx. The
plus
character is not allowed.
By this method the communicator receives
Ademco Contact ID®
or
Scancom
protocol data sent from alarm system, saves it to me-
mory buffer and transmits it to monitoring station via GSM audio channel.
Set the following ET082 parameters using
ELDES Configuration Tool
software:
1. Switch to
Advanced
mode by enabling
Backup Enabled
parameter.
2. Select
Voice Calls
method as
Primary
connection.
3. Set
Backup 1
and
Backup 2
connections if required.
4. Select
Contact ID
or
Scancom
protocol. By default,
Contact ID
is selected.
For more details, please, refer to
ELDES Configuration Tool
software’s HELP section.
If PSTN connection is used, the communicator also monitors the voltage (dial tone monitoring optional) on the PSTN and in case
the PSTN is unavailable, disconnected or cut off (voltage drops below 4V), ET082:
• switches to
Voice Calls
method,
• notifies monitoring station about PSTN failure,
• continues transmitting data to monitoring station via GSM audio channel with data buffering until the PSTN is restored.
NOTE:
In case of
Voice Calls
method failure the communicator switches to
Backup 1
and
Backup 2
connections (if set) respecti
-
vely and attempts to continue transmitting data to monitoring station until the previous connection (-s) is restored.
