ELCOM Euro-2100, User Manual

Page: 21 / 68

Programming manual
Euro-2100 © Elcom, s. r. o.
21
Flag 5 - Parameters of serial communication
Flag 6 - Printing mode setting
Digit Default
setting Meaning Valid values
1 0 Programming of the terminal code for the
bar code scanner 0 – terminator CR and LF, 1 – ter-
minator CR, 2 – terminator LF
2 3 Programming of communication speed of
the bar code scanner 0 – 1 200 Bd, 1 – 2 400 Bd, 2 – 4 800
Bd, 3 – 9 600 Bd, 4 – 19 200 Bd
3 1 Programming of communication speed of
the PC 0 – 9 600 Bd, 1 – 38 400 Bd
4 0 Communication protocol for Electronic sca-
les 0 – CAS Morcan, MARTES T,
1 – Euro scales, MARTES M,
2 – Macca K, 3 – not used
5 0 Data transmission direction in PC-ON
LINE mode 0 – PC transmits, 1 – PC trans-
mits and receives
6 0 Communication protocol for payment ter-
minal 0 – communication is not allowed,
1 – Bull Amadeo, 2 – PinPad -
KeyCorp
Digit Default
setting
Meaning Valid values
1 0 Printing modes without external power sup-
ply 0 – normal mode, 1 – economical
mode, 2 – high speed mode
2 0 Printing modes with external power supply 0 – normal mode, 1 – economical
mode, 2 – high speed mode
3 1 Graphical logo printing 0 – no, 1 – yes
4 0 Height of printing font 0 – normal font: character height
of 2.5 mm, 1 – not used
5 1 Standby mode 0 – standby inactive, 1 – standby
after 1 min., 2 – standby after 5
min., 3 – standby after 10 min., 4
– standby after 15 min.
6 2 Stage of calculator key back-light in Calcu-
lator mode
0 – off, 1 – on, 2 – blinking
7 0 Stage of calculator key back-light outside of
Calculator mode 0 – off, 1 – on
< Figure 3.4
Fourth system
flag values.
< Figure 3.5
Fifth system
flag values.
< Figure 3.6
Sixth system
flag values.
Flag 7 - Limit and value of the percent add-on
You can shift from limit to value programming by pressing the ( Subtotal ) button. The
directional arrow shows either limit or value, whichever is actually programmed.
Digit
Default set-
ting Meaning Valid values
Left 00
Limit for the percent add-on entered during
sale
00–99
Right 0000
Programmed percent add-on value (to set va-
lue of 10 enter 1 0 0 0)
0000–9999
< Figure 3.7
Seven system
flag values..
2 0 Required Subtotal key pressed before receipt
is finished 0 – not required, 1 – required
3 0 Required Credit Card number entering if
paid by Credit 0 – not required, 1 – required
4 0 Required customer’s payment amount ente-
ring 0 – not required, 1 – required