ELCOM Euro-2100 User Manual Download

Page: 15 / 68

Cash register characteristics

Euro-2100

The displays fully support national characters (if
needed) and allow also other characters (as nu-
merals and special characters). It‘s easy and com-

prehensive to read from this type of display.

The customer display has back-light installed
by default.

Customer display description

ims responsibility for the transactions. The
name of the logged-in cashier, is printed on
each receipt header. The transactions are recor-
ded in the cashier’s account and are displayed
in the cashier’s report. In the void mode (R or
T) this button functions as arrow up or jump
to the previous item. It is also used to evoke the
cashier report in “X” mode and for the cashier
programming in “P” mode.

The

Paper feed

button shifts the receipt

ribbon without printing. The receipt ribbon is
fed in 1,5 cm by pressing this button.

Pressing

the

Receipt

button in “T”

and “R” mode allows you to switch the receipt
printing on and off. The printing switched off
is signalled by characters “Prn”.

The

Multiply

button is utilized for mul-

tiplication if two or more pieces of the same
item are being sold. It used for displaying the
time in the registration mode. It is also used to
activate the backlight activation in “X” mode.

The

Price

button enables manual entry

of an item price rather than the preprogram-
med PLU or DPT price. It is also used for fast
PLU price programming in “P” mode.

The

PLU

button (

price look-up

) makes

it possible by means of the PLU code to call
out the programmed data about an item, price,
name, department, VAT, etc. See PLU transac-
tions. It evokes a PLU report in “X” or “Z”

mode. It is also used for PLU programming in
“P” mode.

The

Mode

button is used for switching

into the individual modes of the cash register. Exit
the STANDBY mode by pressing this button.

After finishing a transaction, print

out the same receipt again by pressing

Dupli-

cate

button. The receipt is denoted “DUPLI-

CATE”.

The

Credit

button is used to finalize

the sale in case of credit card payment.

The

Check

button is used to finalize the

transaction in case of check payment. It also
evokes a financial report in “X” mode and is
used for the programmed data printing in “P”
mode.

These two buttons are

used to add the percent add-on or to subtract
the percent discount for a particular item or
for the complete transaction according to the
programmed values. The percent add-on but-
ton

is also used for sales units program-

ming in “P” mode. The percent discount but-
ton (shift+cr) is also used for expended flags
programming.

The

Subtotal

button displays and

prints the actual subtotal value according to the
setting of the fourth system flag.

15-12-2005

11:07:39

< Figure

2.5

Alphanumeric
LCD display.

The

Total

Cash

button is used to finalize the sale in case of cash payment. It also evokes

a daily report in “X” or “Z” mode.

The function in an upper part of a key is

chosen by holding the

Shift

button and then

pressing the key with two functions

Cashier display description

The cashier display of Euro-2100 is a colour al-
phanumeric LCD display with 36 characters.
The high quality of display, its contrast and
brightness are result of black mask technology.
This type of display complements the unique-
ness of the Euro-2100 cash register. For impro-
ved readability, the display is divided into three
groups: the article name (first row, twenty cha-
racters), amount and type of article (second
row, six characters) and finally the article price
(second row, ten characters). The visibility of
displayed data is also enhanced by the special
green-white colour combination for characters
and by using two character sizes.

ECR displays description