Programming manual
Euro-2100
© Elcom, s. r. o.
30
the ECR is disconnected from power, it
will resume sorting after turned on again.
Setting up the bar-code scanner
To secure a reliable functioning of bar code
scanning it is important to program the scan-
ner correctly and connect it properly to the
cash register. Parameters of the bar code scan-
ner setting:
• eight data bits
• none
parity
• one stop bit
• transmission speed and terminal character
is according to setting of the fifth register
system flag
The default setting of flag no. 5 corresponds to
Metrologic bar code scanners (MS 951, MS 6720,
MS 7100, MS 860, MS 6130 and MS 9520). All
you have to do is read the following bar codes
from the scanner programming manual:
1) Enter/Exit
2) Recall Default
3) Enter/Exit
The ECR is able to handle bar codes contai-
ning data for product weight. The format is
the following: PP XXXX V MMMMM K; PP
- prefix of bar code (28 or 29), XXXX - PLU
number (0001-2400), V - scales check digit,
MMMMM - product weight (3 decimal digits)
and K - bar code check digit.
Quick PLU price programming
If you need to change only the prices of seve-
ral PLUs, you can easily do it by the following
procedure:
1) Switch the ECR to “P” mode by pressing
.
2) Enter the PLU number and press the
(
Price
) button. If you don’t enter any
number, the ECR will start form PLU no.
1. The PLU number and the label (“
PRI-
CE
”) appear in the first display row, current
PLU price is displayed in the second row.
3) Enter the new price (maximum eight digits
including decimals).
4) Press
(
Subtotal
) key to continue in the
price programming of the next PLU; proce-
ed to step 3). Press
(
Total
) key to finish
the quick PLU price programming.
Quick PLU stock programming
The cash register also records stock informa-
tion for each PLU. The PLU stock informa-
tion can be changed to another value directly,
or you can alter stock by operations in the re-
gistration mode.
1) Switch the ECR to “P” mode by pressing
.
2) Enter the PLU number and press the
(
Scales
) key. If you didn’t enter any num-
ber, the ECR will start from PLU no. 1. The
display shows current PLU number and la-
bel “
STOCK
” in the first display row and
the current stock for that PLU in the se-
cond row.
3) Enter stock value (up to nine digits, to three
decimal places) and press:
•
(
Subtotal
) key to apply the
entered number as the new stock
value,
•
(
Surcharge
) key to add
the entered number to the current
stock or
•
(
Discount
) key to sub-
tract the entered number from the
current stock.
BAR CODE DUPLICATE
3
PLU barcod
CODE SORTING
0.00
1
PLU price
0.000
1
PLU stock
3. PLU
3
PLU barcod
Summary of Contents for Euro-2100
