ELCOM Euro-200T, User Manual

Page: 42 / 92

42
Programming manual
PROGRAMMING THE EURO CURRENCY
The Euro-200T/TX allows you to use the Euro currency. Depends on the phase of the Euro currency im-
plementation, it is also possible to register in the national currency (phase no. 1 and no. 2) or in a foreign
currency (phase no. 3). Registration with the Euro is divided into four phases.
Phase without Euro currency
The cash register works without the Euro. All transactions are performed in the national currency.
First Euro currency phase
In the first Euro phase the main currency is the national one, the secondary currency is the Euro. The custo-
mer can pay either in the national currency or with Euro. Going back to the phase without Euro isn’t possible
without resetting of the ECR. Call your service technician in that case.
Entering into the first Euro phase procedure:
1) Switch the ECR to the “P” mode by pressing

.
2) Enter the code by pressing

.
3) Enter the acronym for the national currency (three characters maximum) and press

( S
UBTOTAL
) key.
4) Enter the exchange rate for Euro, maximum rate is 10000, minimum rate is 0,0001 and maximum
number of digits is 9 with max. 4 decimals (caution – in this case decimals are not recognized au-
tomatically, e.g. in the case that required value is „42,124“, it is necessary to use comma) and press

( S
UBTOTAL
).
5) Enter the currency flags according to figure 3.20 and press

( S
UBTOTAL
).
After programming, the information about transition into first phase of Euro currency is displayed. The same
information is also printed out along with values entered during the transition.
Figure 3.20. Currency flags
Digit Meaning Valid values
1. System of rounding
0 – up from 5,
1 – always up,
2 – always down,
3 – special quarter rounding
2. No. of decimal places for currency displaying
0 - 3
3. No. of decimal places for currency rounding
During the first Euro phase the actual exchange rate can be set by the following procedure:
1) Switch the ECR to the “P” mode by pressing

.
2) Press the

( D
RAWER
) key.
3) Enter the current exchange rate (maximum currency value is 10000, minimum currency value is 0,0001
and maximum number of digits is 9 with maximum 4 decimals) and press

( S
UBTOTAL
).
Before change is applied it is necessary to perform total (daily) „Z“ report.
1 EUR=1GBP
Curr. rate