ELCOM Euro-200T, User Manual

Page: 39 / 92

39
Programming manual
6) Press

( S
UBTOTAL
) to continue with programming of second PLU flag. The display will show current
PLU number and label (“
flag2
”) in the second display row and current value of the flag in the first
row. Press

( T
OTAL
) to leave PLU programming (next steps will not run)
7) Enter the data for the second PLU flag; orient yourself by the Figure 3.19. Correct mistypes by using

( C
LEAR
) key. To the PLUs within 1001–1015 can not be linked any other PLU.
Figure 3.19. Second PLU flag values.
Digit Default setting Meaning Valid values
1, 2 00
Assigning the sale of another PLU to the sale of
an actual PLU (linked PLU) 00 – no linked PLU,
01 – PLU No. 1001 is linked,
02 to 15 – PLUs 1002-1015 are linked
3 1
Sales unit assigning 1 – The first sales unit assigning,
2 to 8 – assigning the sales unit 2 – 8
4 0 PLU stock information on PLU report 0 – no, 1 – yes
5 1 PLU sale possibility even if stock is negative 0 – no, 1 – yes
6 1 Split pricing possibility 0 – no, 1 – yes
7 8
HALO limit, maximum 8 (maximum number of di-
gits allowed)
1 - 8
8) Press

( S
UBTOTAL
) to continue with name programming for the current PLU. The display shows
current PLU number and label (“ name ”) in the second display row and the name in the first display
row. Press

( T
OTAL
) to finish the PLU programming (next steps won’t run).
9) Enter the PLU name/description, maximum 18 characters (or 9 double width characters) for T mo-
del and maximum 24 characters (or 12 double width characters) for TX model. See the end of this
chapter on how to enter texts. You can correct mistypes by using

(Clear) key.
10) Press

( S
UBTOTAL
) key to continue with programming of the bar-code for the current PLU. The
display shows the current PLU number and label (“
barcod
”) in the second display row and the
currently assigned bar-code in the first row. Press

( T
OTAL
) to finish the PLU programming (next
steps won’t run).
11) Enter the PLU bar-code either using the keyboard or using a scanner (scanner has to be connected
to ECR and properly configured). You can correct mistypes using

(Clear) key.
12) Press

( S
UBTOTAL
) key. If you entered a bar-code that is already assigned to a PLU, the ECR will
warn you on this by displaying “
barcode duplicate
” along with the PLU number of the
PLU that bar-code is assigned to already.
1
PLU name
0000000000000000000
1
PLU barcod
0010118
1 PLU flag 2