ELCOM Euro-200T, User Manual

Page: 27 / 92

27
Programming manual
System flags correction
1) To change the settings of any system flags, switch the cash register into the “P” mode by pressing

.
2) Enter the flag number to be edited and press the

(RA) buttons.
3) Enter desired flag value and press the

(Subtotal) button.
4) Print the new programmed settings by pressing the  (Check) button.
5) Finish the programming by pressing the

(Total) button.
System flags values print out
In the programming mode, select the flags programming by pressing the

(RA) buttons. Press the

(Check) button to print the flags values. It is possible to print the value of currently programmed flag by
pressing the

(EAN) button.
Flag 1 – Number of decimal places, method of rounding, TAX system…
Figure 3.1. First system flag values.
Digit Default setting Meaning Valid values
1 3
System of rounding:
0 – up from 5,
1 – always up,
2 – always down,
3 –special rounding
2 0
Tax system:
0 – VAT
1 – TAX
3 1 No. of decimal places to which total price should be rounded
0 – 3
4 1 No. of decimal places to which VAT should by rounded
5 1 No. of decimal places to which price should be rounded
6 2 No. of decimal places to which price, VAT should be displayed
Note: Value of the first system flag can be changed only if Grand Totals are zero.
Flag 2 - TAX printing, number of logo lines, blank lines…
Figure 3.2. Second system flag values.
Digit Default setting
Meaning Valid values
1 1 TAX values printing
0 – TAX values not printed,
1 – TAX values printed on receipt
2 0
Date format 0 – dd-mm-yyyy, 1 – mm-dd-yyyy
3 3
No. of decimal places of quantity values 0 – 3
4 2
Number of blank lines between receipts 0 – 6
5 9
Number of logo lines 0 - 9
6
0 Split pricing/successive multiplication entries
0 – split pricing,
1 – successive multiplication