40
Programming manual
13) After the bar-code has been successfully assigned, the ECR continues with programming of next
PLU; proceed to step 3). Press
(Total) to finish the PLU programming. After the PLU program-
ming is over, the ECR will sort all the bar-codes and indicates that it’s doing so on its display. If the
ECR is disconnected from power supply, it will resume sorting after turned on again.
Setting up the bar-code scanner
To secure a reliable functioning of bar code scanning it is important to program the scanner correctly and
connect it properly to the cash register. Parameters of the bar code scanner setting:
• eight data bits
• none parity
• one stop bit
• transmission speed and terminal character is according to setting of the fifth ECR‘s system flag
The default setting of flag no. 5 corresponds to Metrologic bar code scanners (MS 951, MS 6720, MS 7100,
MS 860, MS 6130 and MS 9520). All you have to do is read the following bar codes from the scanner pro-
gramming manual:
1) Enter/Exit
2) Recall Default
3) Enter/Exit
The ECR is able to handle bar codes containing data for product weight. The format is the following: PP
XXXX V MMMMM K; PP - prefix of bar code (28 or 29), XXXX - PLU number (0001-2400), V - scales check
digit, MMMMM - product weight (3 decimal digits) and K - bar code check digit.
In the case of usage of scanner with keyboard wedge connector it is necessary to program the scanner as
follow:
1) Enter / Exit
2) Emulation for PS/2
3) STX prefix
4) ETX sufix
5) Enter/Exit
Quick PLU price programming
If you need to change only the prices of several PLUs, you can easily do it by the following procedure:
1) Switch the ECR to the “P” mode by pressing
.
2) Enter the PLU number and press the
(
P
RICE
) button. If you don’t enter any number, the ECR will
start form PLU no. 1. The PLU number and the label (“
price
”) appear in the second display row,
current PLU price is displayed in the first row.
0.00
1 PLU
price
CODE SORTING
BAR CODE DUPLICATE
3
PLU
barcod
Summary of Contents for Euro-200T
