ELCOM Euro-200T, User Manual

Page: 33 / 92

33
Programming manual
RECEIPT GRAPHIC LOGO PROGRAMMING
In the ECR is preprogrammed graphic logo by its producer. You can reprogram it using communication
software (Euro2A, ECR.dll, Com2A.exe, Com32.dll), available at producer‘s web site (www.elcom.eu).
Graphical logo parameters:
format bmp, 1 bit (black and white)
resolution T model 160x180 pixels, TX model 240x160 pixels
CASHIERS PROGRAMMING
The programming of cashiers consists of three steps:
• cashier’s name
• cashier’s password
• cashier’s access rights
The ECR allows you to program up to six cashiers. This programming allows you to assign a password to
each cashier, which will be used by him/her to log into the ECR and use its functions. This password will
also identify the cashier working on the ECR: the receipts issued by that cashier are identified by his/her
name and all operations are assigned to him/her.
Programming procedure:
1) Switch the ECR to the “P” mode by pressing  .
2) Press the

( P
ASSWORD
) key. Display will show the current cashier number and label (“
NAME
”)
in the second display row which indicates that you are programming the cashier’s name. First dis-
play row contains the current cashier’s programmed name.
3) Enter the name for the current cashier. Cashier name can have up to ten characters. If you mistype
or make a mistake while entering text, you can use the  ( C
LEAR
) key to delete recent characters.
See the end of the chapter for hints on entering texts.
4) Finish the cashier name programming by pressing

( S
UBTOTAL
) key. The ECR shows the current cashi-
er number in the second display row, together with the label (“
PASSW
”) that indicates programming of
cashier’s password. Press

( T
OTAL
) to finish the programming procedure (next steps will not run).
5) Enter the cashier’s password. The password is composed by the up to four numerals. If you mistype
during entering of the password, you can use

( C
LEAR
) key to correct your mistakes.
6) Finish the programming of cashier’s password by pressing

( S
UBTOTAL
) key. The ECR will then
show the current cashier number in the second display row along with label (“
ACCESS
”) that
indicates programming of cashier’s access rights for ECR modes. Press

( T
OTAL
) to finish the
entire programming procedure (next steps will not run).
CASHER1
1 NAME
0001
1 PASSW
1111
1 ACCESS