ELCOM Euro-200T, User Manual

Page: 34 / 92

34
Programming manual
7) Program the mode access flags according to the Figure 3.14. If you mistype, correct your mistakes
using

( C
LEAR
) key.Warning: you cannot deny access to programming mode “P” for the cashier
no. 1.
Figure 3.14. Cashier access rights.
Digit Meaning Valid values
1 Access to the “X” mode
0–no, 1–yes
2 Access to the “Z” mode
3 Access to the “P” mode
4 Access to the “T” mode
8) Press the

( S
UBTOTAL
) key to continue programming of the remaining cashiers; continue with step
3. If you press

( T
OTAL
) key, you finish the programming procedure for the cashiers.
Correction of cashiers values
1) Switch the ECR to the “P” mode by pressing

.
2) Enter the number of the cashier you wish to correct and press

( P
ASSWORD
) key.
3) Continue in the same way as shown in section above.
4) You can print out data of all cashiers by pressing

( C
HECK
) key; press

key to print out data of
the current cashier only.
5) Finish the corrections by pressing

( T
OTAL
) key.
Printing of cashiers values
To check the programmed names and other settings, press the

( C
HECK
) key in the cashier program-
ming. In the programming mode, press the

( P
ASSWORD
) key first and then press

( C
HECK
) key. Print
the programmed values of the current cashier by pressing the

( EAN ) key.
FUNCTION TEXTS PROGRAMMING
The Euro-200T/TX allows you to program all the operation labels that can be displayed/printed to the
receipt. The default values for all function texts are shown in the Figure 3.15. You can adjust all of them to
your needs.
Function texts programming procedure:
1) Switch the ECR to the “P” mode by pressing

.
2) Press the

( V
OID
) key. ECR will display the number of the currently programmed function text in
the second display row and contents of that text in the first display row.
3) Enter new function text that could have up to 17 characters. If you mistyped, you can correct mistakes
by pressing

( C
LEAR
) key. Details on entering texts are located at the end of this chapter.
4) Press

( S
UBTOTAL
) key to programme next available function text; continue with step 3). Finish the
function texts programming by pressing

( T
OTAL
) button at any time.
Correction of function texts
1) Switch the ECR to the “P” mode by pressing

.
CASH
1 Func. text