Program manual
Euro-2000TE Alpha
© Elcom Ltd.
52
Afterwards the information on conversion into the second stage of
Euro
currency is displayed. The same
information is also printed out.
During the second stage the actual EUR rate can be set in the programming mode by the following proce-
dure:
N
actual rate
V
W
Note 1:
All grandtotals will be deleted by moving on to the second stage.
Note 2:
The conversion into the second stage is possible only after daily and periodical reports have been
executed. The return to the first stage is not possible without an ECR master reset. It is necessary
to call your service technician.
3.12.4 3rd stage of
Euro
currency
The basic currency is
Euro
, the supplementary any foreign currency.
The customer can pay either in
Euro
or in any foreign currency.
Programming the third stage of
Euro
currency.
Turn the key to the
P
position and press the following keytops:
2
0
0
3
K
currency name
V
EUR rate
V
currency flag
V
Currency name:
the abbreviation of a supplementary currency, max. 3 characters
EUR rate
:
the actual
Euro
currency rate to the national currency (entered to max. 11 digits).
max rate is 10 000
min. rate is 0,0001.
Currency flag:
1st digit - the number of decimal places to which the amount of supplementary cur
rency is displayed
2nd digit - the number of decimal places to which the amount of supplementary
currency is rounded
Afterwards the information on conversion into the third stage of
Euro
currency is displayed. The same infor-
mation is also printed out.
During the third stage the supplementary currency rate can be set in the programming mode by the follow-
ing procedure:
N
currency name
V
EUR rate
V
currency flag
VW
Note:
The return to the stage without
Euro
currency is not possible without an ECR master reset. For this,
it is necessary to call your service technician.