© Elcom Ltd.
Euro-2000TE Alpha
Program manual
43
3.10 Sales unit programming
The sales unit can be assigned to each PLU. It is possible to program 8 sales units, each
of up to 3 characters. Use hexadecimal and alphabetical table for programming.
3.10.1 Sales units programming
Turn the key to
P
position and press the keytop
S
. The number of the sales unit will appear on the first
line of the display and the name of the sales unit in the second line will appear on the display. Enter
hexadecimal codes for the name of a new sales unit and press
V
. Afterwards the ECR is ready to
program the next sales unit. If you have made a mistake, by pressing the keytop
H
(Clear)
the previous
character is deleted and you can correct it. The sales unit can be ended anytime by pressing the keytop
W
.
Programming procedure:
Hexadecimal codes
Programming of the next sales unit
Skip the programming
From the 1st sales unit
Sales unit number
V W
A
0 @
..
S
1 2
,
..
3.9.5 Printing of the department values
Check department programmed values by pressing the
Q
button in the department programming mode.
If in other than programming mode, press the button of one of the departments and then the
Q
button.
Programmed DPT
1
. DPT
PRICE: 12.30
NAME :
DPT1
FLAG
10038
2
. DPT
PRICE: 85.00
NÁME:
DPT2
FLAG 20038
. . . .
Display:
The programming of the second sales unit.
2. sales unit
pcs