© Elcom Ltd.
Euro-2000TE Alpha
Program manual
51
3.12
Euro
currency programming
The ECR Euro-2000TE Alpha allows you to use
Euro
currency. According to the stage of Euro currency
implementation it is possible to account in a national currency (stage No. 1. and 2.) or in a foreign cur-
rency (stage No. 3).
Accounting with the
Euro
currency is divided into four stages:
3.12.1 Stage without
Euro
currency
The ECR works without
Euro
.
3.12.2 1st stage of
Euro
currency
The basic currency is a national one, the supplementary one is
Euro
.
The customer can pay either in a national currency or in
Euro
.
Programming the first stage of
Euro
currency.
Turn the key to the
P
position and press the following keytops:
2
0
0
1
K
currency name
V
EUR rate
V
currency flag
V
Currency name: the abbreviation of the national currency, up to 3 characters
EUR rate
:
the actual
Euro
currency rate to the national currency entered to max. 11 digits.
max rate is 10 000
min. rate is 0,0001.
Currency flag:
1st digit - the number of decimal places to which the amount of EUR is displayed
2nd digit - the number of decimal places to which the amount of EUR is rounded
Afterwards the information on conversion into the first stage of
Euro
currency is displayed. The same infor-
mation is also printed out.
During the first stage the actual EUR rate can be set in the programming mode by the following procedure:
N
actual rate
V
W
Note:
The return to the stage without
Euro
currency is not possible without an ECR master reset. For this,
it is necessary to call your service technician.
3.12.3 2nd stage of
Euro
currency
The basic currency is
Euro
, the supplementary one is
a national
.
The customer can pay either in a national currency or in
Euro
.
Programming the second stage of
Euro
currency.
Turn the key to the
P
position and press the following keytops:
2
0
0
2
K
EUR rate
V
EUR rate:
the same as in stage No. 1.