ratiotec GmbH & Co. KG | Tel.: +49 201 361 490 | Fax: +49 201 361 49 26 | Email: [email protected]
[EN]
1.
2.
3.
4.
Turn on the device by pressing the
ON/OFF
button. The device turns on automatically.
The sensors are adjusted by the software.
In normal working state, press the
„CLR“
key
5 times
consecutively to enter main-
tenance menu interface.
Press the
„ADD“
or
„CLR“
key to navigate
the menu. Press the
„ADD“
key twice to
select the
„3 SENSOR ADJUST“
option.
Afterwards press the
„RESET/ENTER“
key,
to select the
„SENSOR ADJUST“
option.
The calibration of the following sensors
can be performed:
4.1
Counting IR sensors
4.2
UV sensors
4.3
CIS white light
4.4
CISIR transmitted light
It shows the following display.
4.1 Calibration of Counting IR sensors
CALIBRATION GUIDE
rapidcount X 300 P
