02/2016 - Art. Nr. 4200 1046 8202A
24
Displaying the setting data from the manual control display
Once the burner setting procedure has been successfully
completed in menu 1, the settings for all the operating states are
stored in the control unit.
At the same time, a back-up copy of the setting values is saved in
the display at the end of menu 1. If the control unit is subsequently
changed, the setting data stored in the display can be consulted to
enable the new control unit to be set.
To do this, call up the menu overview using the
key.
Using the
key select the menu
"Displaying the setting data"
and confirm with the
key.
The screen opposite appears. It is not possible to automatically
transfer the data to the new control unit. Note down the setting data
and enter it manually into the control unit via menu 1.
Exit the menu using the
symbol.
Caution: the values shown in this menu correspond with the values that were last successfully set with the current
manual control display using menu 1 (menu 1 must have been completed in its entirety).
Start-up
Displaying the setting data from the manual control display
