Parameters of Groups b, c, and d are provided upon request only
Display
level
LMU Functional ID
Description
Temperatures (specialist level)
b 0
DiagnoseCode
LMU internal SW diagnostics code
b 1
TkRuec
Boiler return temperature
b 2
Tbwist2
Reservoir temperature at sensor 2 (non existent)
b 3
Tabgas
Exhaust temperature
b 4
TiAussen
Exterior temperature
b 5
TaGem
Mixed exterior temperature
b 6
TaGed
Dampened exterior temperature
b 7
Tvist
Flow temperature AGU 2.500
b 8
Not assigned
b 9
Not assigned
Process values (specialist level)
c 0
Not assigned
c 1
IonStrom
Ionization flow
c 2
Gebl_Drehz
Blower rpm
c 3
Gebl_PWM_AusAkt
Current blower control (PWM)
c 4
RelModLevel
Relative output
c 5
Pumpe_PWM
Pump target value (PWM)
c 6
ek0
Control difference
c 7
Not assigned
c 8
Not assigned
c 9
Not assigned
Target values (specialist level)
d 0
Not assigned
d 1
Tsoll
Target value for 2
-
point and modulation control
valve (PID)
d 2
TkSoll
Current boiler target value
d 3
TsRaum
Room temperature target value
d 4
TbwSoll
Reservoir target value
d 5
PhzMax
Maximum degree of modulation during heating
mode
d 6
NhzMax
Maximum rpm at maximum output during heating
mode
d 7
Not assigned
d 8
Not assigned
d 9
Not assigned
Note:
By either pushing the “mode” button or
waiting for 8 minutes, the display
automatically reverts back to the
standard display.
1. Push information button.
2. Push buttons
for at least 3 seconds.
3. Use buttons
to select the respective parameter.
1. Push information button.
2. Push buttons
for at least 3 seconds.
3. Push button
4. Push buttons
to select the respective parameter.
1. Push information button.
2. Push buttons
for at least 3 seconds.
3. Push 2x button
4. Push buttons
to select the respective parameter.
Information Display
Via AGU 2.311 Operating Panel
30
en
Summary of Contents for TRIGON 100
Page 34: ...Service www elco net...
