elco RENDAMAX 30, Operating Instructions Manual

Page: 10 / 28

Assembly
Preparations for the assembly
Installation and distances
Unrestricted access for operation and
maintenance is only possible if the
minimum distances are observed.
Place of installation
Do not install the unit in rooms with
aggressive vapours (e.g. hairspray,
perchloroethylene, tetrachlorocarbon),
large occurrences of dust or high
humidity (e.g. laundry rooms). The
place of assembly must be secure
against frost. If these requirements are
not fulfilled, the warranty for damage
shall lapse.
When assembling the device, please
ensure that no foreign parts (e.g. drill
dust) enter the gas burner. Use covers.
As different requirements apply in
different
Bundesländer, consulting the
appropriate authorities and the appro-
priate district master chimney sweep is
recommended before installation.
Gas connection
The laying of gas pipes and the gas
connection are exclusively the tasks of
the licensed gasfitter. Clean deposits
from the heating network and gas pipes
before connecting the gas burner,
especially order systems.
Please ensure that the gas pipes are
laid free from tension.
Before setting up, check the pipes and
gas connections.
The gas fittings on the burner can be
pressurised to a maximum of 150 mbar.
Minimum distances
10