elco AEROTOP G, Installation, Operation And Maintenance Manual, Page: 5 / 58

General information
Safety warnings
Area of use
The AEROTOP G heat pump
is designed exclusively for
heating and the production of
potable hot water.
The heat pump can be inte-
grated in newly installed or
existing heating systems by
complying with the operation-
al limits.
In order to ensure trouble-free
operation
of the heat pump, we recom-
mend that
you set up a service contract.
The setup, installation, config-
uration, and commissioning of
the heat pump system must
be carried out by a qualified
technician in observance of
the relevant statutory rules,
regulations, and guidelines,
as well as the operating in-
structions.
The use of the heat pump
must be registered with the
local power supply company.
Do not tilt the heat pump more
than 15° when transporting.
Avoid exposing the heat pump
to any type of moisture or hu-
midity. Protect the heat pump
against damage and dirt dur-
ing all stages of assembly.
The components and the pipes
of the cooling circuit should
never be used for transport
purposes.
The heat pump is fastened to
the transport pallet.
All electric circuits must be
de-energized before opening
the unit.
All work on the cooling circuit
must be carried out by trained
technicians who are familiar
with and trained in the use and
handling of the coolant.
Never use abrasive, acidic or
chlorine containing cleansers
on the surface of the equip-
ment.
For cleaning , it’s recommend-
ed using a damp cloth.
The manufacturer declines all
responsability for the misuse
of the heat pump
5