5. PREPARATION AND INSTALLATION ELBO CONTROLLI srl
Preset E236+
8
5.2 SAFETY NORMS
The personnel destined to use the Presetter E236+ are not required to use any particular protection;
however, they must be informed of the following potential dangers:
•
In particular conditions of measurement of the vertical axis, the objective’s vision system of the
support structure can be at a height, which can be ‘head butted’ in case the machine is used
without the necessary attention.
•
We recommend carrying out the manipulation of tools carefully and if necessary, protecting
one’s hands because tools by their nature are sharp and may be dangerous.
þ
The person responsible for employee safety should train the people required to use the tool presetter by
insisting on the reading of this manual. (for Italy see Legislative Decree 81/2008 as amended by
Legislative Decree no. 106 of 3 August 2009).
5.3 SUGGESTED USE OF THE MACHINE
The E236+ Tool Presetter is an instrument to preset and measure the tools surveying their dimensions along
X-Z-axes, in accordance with the axes definition of the machine using the above-mentioned tools. The
measurable tools are to be compatible with the presetter spindle; any attempt to adapt the tool presetter
spindle taper without using the appropriate adaptors supplied by
ELBO CONTROLLI S.r.l.
is to be
considered improper use.
The maximum weight of the tool to be measured should be no more than 30Kg.
Any other use is to be considered improper and potentially compromising the operator’s safety.
þ
The E236+Tool Presetters to be handled by a single person in conditions of tested and controlled
efficiency, in respect of all procedures described in this manual.
5.4 PACKING, TRANSPORT AND STORAGE
The instrument must be handled inside its proper cardboard box, which prevents it from normal mechanical
stresses.
Stated on the outside of the packaging are the shipping instructions, particularly the specified total weight,
transport position and using symbols, vulnerability to atmospheric agents and the need to handle with care.
Keep the original packing and use it for further transportation of the instrument.
Tool Presetter transportation is to be carried out by qualified carriers able to grant the correct handling of
the transported goods, observing the following precautions:
•
Lift only with trolleys or pallet jacks.
•
Do not bump, throw, drop, roll or drag the case.
•
Do not overcharge the packing by piling more than three cases.
•
Avoid exposure to atmospheric agents.
•
Maintain the prescribed transportation position.
The storage environment must fall within the following environmental conditions:
•
Shelter from atmospheric agents.
•
Temperature between -10 and 50 °C.
•
Relative humidity between 20% e 95% without condensation.
