10. TOOLSET ELBO CONTROLLI srl
Preset E236+
51
While in the lower part of the screen the first record will appear of the number
of tools defined for the Set:
For each tool it’s possible to be memorized: the letter “
T
“ of the corrector
used by the numerical control of the machine(from 1 to 9999), the “
X
” and
“
Z
” dimensions and the radius “
r
”.
All the numerical fields can be measured and acquired or , pressing directly
on the value, set by the iconboard.
The first thing we have to define is the number of the tool corrector: press
the icon
, and type the number assigned to the tool e.g.
, followed by the confirm icon.
Once the best collimation of the tool is made (best focus + best tangency), it
is possible to store the dimensions using the icons
e
.
Values of the dimensions of the tools are
immediately shown in the boxes next to the
storage icons and will be automatically be
saved on exiting the toolset or before inserting
a new tool.
In case you want to take the measurement using the fixed reticule, before
acquiring the measurement, bring the axis into tangency with the reticule.
E.g. Acquisition X and Z axis with
fixed reticule.
Toolset number
Tool no.1 to 0
Machine origin number and setting
